Home | Sponsors | Hotels | Exhibitors | WATMAN2010 | Technical Workshop | Previous Exhibitions | About The Organizer | Exhibitor's Manual | Downloads | Supporting Organizations | Media Partners | Contact Us
copyright © 2010.watertoday.org. All rights reserved.
Water Today's Water Expo 2010 
Technical Workshop
Water Today’s Certification Training Program – 2 Days on PRE -TREATMENT, PHYSICO-CHEMICAL, BIOLOGICAL AND ADVANCED WASTEWATER PURIFICATION SYSTEMS FOR COMPIANCE & RECYCLE
25 & 26th February 2010 at Bombay Exhibition Centre, Mumbai
INTRODUCTION
Water and Wastewater management is getting merged due to water scarcity and stringent regulatory measures. The users do introspect all the operating environmental “Process & Hardware”, at the existing and while retrofitting/expanding scenarios. On the external front, ETP & STP systems are expanding, in terms of Technological features and modernization, to keep in tune with the integrated water management solutions. With the dwindling of water resources, many are contemplating as how to improve the performance of the installed system for getting recycled grade effluent or cut the O & M expenses. On the supplier front, many technological systems are surfacing with exotic names. User needs to be familiar on the conceptual, constructional and operation & maintenance features of such available technologies, while opting for environmentally benign solutions.
The treatment of effluent is a complex phenomenon with pre-treatment, physico-chemical, chemical, biochemical, tertiary and advanced wastewater purification and associated sludge management process. The selection of ETP process depends on ground holding of these process understandings, besides imitations of technology application, removal of specific pollutants, energy consumption, cost of the plant and end use of treated effluent either for disposal or reuse & recycle purpose. Treatment plant units do require good maintenance like production units. Beyond preventive and corrective maintenance, O&M of ETPs is system oriented management with skilled manpower; chemicals used for treatment, energy consumption, laboratory facilities etc.
With the above issues, Water Today is proposing to organize a 2-day Workshop on “Pre-treatment, physico-chemical, Biological and advanced wastewater purification systems for compliance & recycle”. The overall objective is to discuss various unit process & operations, with technological ground holding, associated with ETP & STP and enable participants for possible design exercises on select wastewater purification system and also discuss a case on retrofitting of existing ETP & STP.
OBJECTIVE
The objective of this program is to facilitate participants in enhanced understanding of design features involved in pre-treatment, primary treatment, physico-chemical treatment, biochemical treatment and sludge dewatering systems. Based on this and select exercises, retrofitting for better operational performance improvement of available ETP & STP can be visualized. As part of the program, 1 hour Examination will be conducted and Certificate of Merit issued.
Program Outline
The course will cover the following topics:
PROGRAM METHODOLOGY
Methodology includes classroom lectures with audiovisuals, design exercises, case studies and sharing of participant’s cases. More emphasis will be on participatory style of learning.
OUTCOME: After attending this course participant will be able to
Who Should ATTEND
This program is intended for
RESOURCE PERSON
N.K.Kuttiappan, who has vast experience in Consulting, Contracting, Capacity Building, Technology assessment and most importantly unbiased in sharing the right approach for a given situation.
PROGRAMME SCHEDULE
Registration starts at 0930 hrs and regular sessions will be from 0945 hrs to 01715 hrs with breaks for lunch, tea and refreshments.
CERTIFICATE OF PARTICIPATION
This course is designed by WATER TODAY. A certificate will be issued by Water Today on conclusion of the programme
Water Today’s Certification Training Program – 2 Days on PRE -TREATMENT, PHYSICO-CHEMICAL, BIOLOGICAL AND ADVANCED WASTEWATER PURIFICATION SYSTEMS FOR COMPIANCE & RECYCLE
25 & 26th February 2010 at Bombay Exhibition Centre, Mumbai
INTRODUCTION
Water and Wastewater management is getting merged due to water scarcity and stringent regulatory measures. The users do introspect all the operating environmental “Process & Hardware”, at the existing and while retrofitting/expanding scenarios. On the external front, ETP & STP systems are expanding, in terms of Technological features and modernization, to keep in tune with the integrated water management solutions. With the dwindling of water resources, many are contemplating as how to improve the performance of the installed system for getting recycled grade effluent or cut the O & M expenses. On the supplier front, many technological systems are surfacing with exotic names. User needs to be familiar on the conceptual, constructional and operation & maintenance features of such available technologies, while opting for environmentally benign solutions.
The treatment of effluent is a complex phenomenon with pre-treatment, physico-chemical, chemical, biochemical, tertiary and advanced wastewater purification and associated sludge management process. The selection of ETP process depends on ground holding of these process understandings, besides imitations of technology application, removal of specific pollutants, energy consumption, cost of the plant and end use of treated effluent either for disposal or reuse & recycle purpose. Treatment plant units do require good maintenance like production units. Beyond preventive and corrective maintenance, O&M of ETPs is system oriented management with skilled manpower; chemicals used for treatment, energy consumption, laboratory facilities etc.
With the above issues, Water Today is proposing to organize a 2-day Workshop on “Pre-treatment, physico-chemical, Biological and advanced wastewater purification systems for compliance & recycle”. The overall objective is to discuss various unit process & operations, with technological ground holding, associated with ETP & STP and enable participants for possible design exercises on select wastewater purification system and also discuss a case on retrofitting of existing ETP & STP.
OBJECTIVE
The objective of this program is to facilitate participants in enhanced understanding of design features involved in pre-treatment, primary treatment, physico-chemical treatment, biochemical treatment and sludge dewatering systems. Based on this and select exercises, retrofitting for better operational performance improvement of available ETP & STP can be visualized. As part of the program, 1 hour Examination will be conducted and Certificate of Merit issued.
Program Outline
The course will cover the following topics:
- Wastewater characteristics and Evolution of Treatment Flow sheet Alternatives
- Wastewater Pre-treatment Techniques – Screen, Oil & Grease removal, Neutralization, Equalization, Toxics removal, Nutrient supplements etc
- Principles and Design Concepts of Primary, physico-chemical and chemical Treatment – Flash Mixer, Flocculation, Floatation, chemical dosing, detoxification, precipitation etc
- Know the process principles involved in Biochemical Technologies like TF, ASP, RBC, MBR, SAFF, FBR, FBBR etc
- Selection of aeration devices – Surface aerator, diffused aerator, star aerator and energy efficiency focus
- Advanced wastewater purification systems – Nutrient removal, Membrane separation systems
- Reuse/recycle focus – and scalping, Toilet Flushing, CT make-up and in-process applications
- Disinfection practices (Chlorination, UV radiation and ozonation)
- Sludge Management – conditioning, dewatering using Filter Press, Centrifuges and advanced systems
- Operation and Maintenance of Treatment Plants and retrofitting opportunities
PROGRAM METHODOLOGY
Methodology includes classroom lectures with audiovisuals, design exercises, case studies and sharing of participant’s cases. More emphasis will be on participatory style of learning.
OUTCOME: After attending this course participant will be able to
- Evolve proper treatment alternative schemes, linked with characteristics and pollution load.
- Familiarity to various design steps associated with treatment processes and design the system
- Level of process & design familiarity through performance out of Examination
- Work on latest technologies of wastewater treatment
- Implement good O&M practices.
Who Should ATTEND
This program is intended for
- Managers, supervisors, engineers, Chemists and Operators, who are in-charge of ETPs from various process industries, regulatory agencies and Laboratories.
- Service provides like consulting, contracting and O & M companies; Policy Bodies who are in the process of approval like Municipal Corporations, Metropolitan Development Authorities and Local Bodies
- Engineers (civil, chemical, environmental and mechanical), technology developers involved in design and maintenance of Effluent Treatment Plants
- Academicians and interested personnel
RESOURCE PERSON
N.K.Kuttiappan, who has vast experience in Consulting, Contracting, Capacity Building, Technology assessment and most importantly unbiased in sharing the right approach for a given situation.
PROGRAMME SCHEDULE
Registration starts at 0930 hrs and regular sessions will be from 0945 hrs to 01715 hrs with breaks for lunch, tea and refreshments.
CERTIFICATE OF PARTICIPATION
This course is designed by WATER TODAY. A certificate will be issued by Water Today on conclusion of the programme